Liming heavy industry have many types of equipment for recycling of slag, such as metallurgical slag crushing, milling waste slags, etc..

　　In metallurgical slags are metals, which are in the form of каплевидных and filamentary metallic inclusions in the form of oxides. The content of metal impurities in the slag is from 2% to 20%, and oxides of these metals from 10 to 20%. The size of grains of these metals varies from 0.01 mm up to several tens of millimetres.

　　Method of processing of waste metallurgical slags

　　Method of processing of waste metallurgical slags, including primary crushing slag up to the size of the rate of not more than 150 mm, sieving on fractions and separation from the Department of metal from slag characterized in that the pre-retrieve from the dumping of metallurgical slag large metal scrap with the subsequent the remaining slag into two components: an empty breed with slag of fraction 0 - 30 mm and slag size of a piece of 30 - 500 mm, with the primary crushing subjected to the second component, collected after fist stpe, after the slag is sorted and choose from him scrap, then spend the gradual fragmentation of slag up to fractions of not more than 60 mm and up to fractions of no more than 30 mm from the interim sorting and sample from him scrap, then slag subjected to виброгрохочению with its scattering to the four factions: 0 - 5, 5 - 10, 10 - 28 and above 28 mm, from fractions of more than 28 mm choose scrap, while the slag of fraction of the 10 - 28 mm and above 28 mm re-granulate to fraction of not more than 10 mm, and then the crushed slag fractions of 0 - 5, 5 - 10 mm subjected to gravitational separation with final separation from it of the metal.In result of processing of metallurgical slags extract the pure metal from slag up to 20%, depending on the processed slag. And these recyclable waste can also be used as construction materials.

　　The advantages of liming heavy industry slag waste processing plant

　　1. Investment pays itself in a short time

　　2. Processingg rate is 100-300 tons p ( p ) per hour (tph)

　　3. Highest metal recovery

　　4. The most advanced technology

　　5. Competitive price compared to other suppliers

　　6. Delivery time 6 months

　　7. Delivery time counted from order to running of the plant

　　8. Every plant will be tailor-made

　　9. Full turn-key plant

　　10. Service and operating contracts availability

　　We have many years of experience in designing slag recycling plants. During that time, company has developed the most reliable and efficient processes to clean and separate valuable raw material from slag.welcome to contact us for more information about waste slag processing machine and we will help you at the first time